SATO FX3-LX - Page 103

103
Charging the Battery by Connecting the AC Adapter
The AC adapter, supplied with the printer, charges the battery while the printer is mounted on the
battery mount kit.
• Do not connect or disconnect the power cord while your hands are wet. Doing so could
cause an electric shock.
• The battery can also be charged with the optional 1ch battery charger. Refer to the
operator manual of the 1ch battery charger for how to charge the battery.
1. Connect the supplied AC adapter (2) to the printer mounted on the battery mount
kit (1).
• The shape of the power plug varies depending on the region in which it was
purchased.
Charging the Battery by Mounting the Printer on the Optional Cradle Kit
The optional cradle kit charges the battery while the printer is mounted on the battery mount kit.
• The battery can also be charged with the optional 1ch battery charger. Refer to the
operator manual of the 1ch battery charger for how to charge the battery.