153
• Before starting the installation, close all applications.
• Power off the printer and connect the interface cable to a computer.
• When you do the printer driver setup, the properties settings, or the print settings, log in
with Administrator Privilege.
• When you use the printer driver, enable bi-directional communication.
• If the terminal service is being started with Windows Server 2008, or the remote
desktop service is being started with Windows Server 2008 R2, Windows Server 2012,
Windows Server 2012 R2, or Windows Server 2016, change the terminal service or
the remote desktop service to the install mode. However, it is not guaranteed that
the printer driver can be used in the terminal service or the remote desktop service
environment.
• When using multiple printers, it is necessary to install as many printer drivers as
printers, to identify each printer.
1. Power on the printer, and confirm that the printer is connected to the network.
2. Start Windows.
3. Download the printer driver from the SATO printer driver download site. http://
www.satoworldwide.com/software/gallerydriver.aspx
4. Extract the downloaded compressed file of the printer driver.
5. Execute PrnInst.exe to start the installer.
6. If a user account control message appears, click [Yes] or [Continue].
7. Click [Next].
To Next Page
Loading...
