SATO FX3-LX - Page 329

329
You can enter a maximum of 32 characters. Alphabets (capital and small letters), numbers and
symbols can be used.
[Hidden SSID]
Set the hidden SSID (stealth function).
Appears only if you have selected [Infrastructure] in the [Mode] menu.
[Mode]
Set the communication method of the wireless LAN.
The options are as follows:
• [Infrastructure]
• [Ad-hoc]
[Channel]
Set the communication channel.
[Channel] can be set only if you have selected [Ad-hoc] in the [Mode] menu.
The number of channels you can set varies depending on the region of the printer.
[Security]
Set the security method of the network. Set the security methods so that the printer, host and network
devices match.
The options are as follows:
• [None]
• [WEP]
• [WPA2+WPA]
• [WPA2]
• [Dynamic WEP]
If you have selected [Ad-hoc] in the [Mode] menu, only [None] and [WEP] will be available.
[WEP Conf.]
Set the WEP key.
Appears only if you have selected [WEP] in the [Security] menu.
The setting items are as follows:
[Authentication]
Set the WEP authentication method.
The options are as follows:
• [Open System]
• [Shared Key]
[Key Index]
Set the key index.
Set the key index (WEP key) according to the access point of the wireless LAN you connect.