471
Error Message 1047 (EAP Authentication Error (EAP Timeout))
When there is an error with the printer, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Tap [OFFLINE].
Cause and Countermeasure
Cause
EAP Authentication failure.
• This error occurs when authentication with the EAP authentication server times out.
This error will not occur if the connection to the access point is not established.
Countermeasure
Use the correct Access Point (AP) and authentication server settings.
EAP Conf.
Contact your SATO technical support center if the error cannot be resolved.
Contact Information for When You Are in Trouble
To Next Page
Loading...
