Segway VILLIAN SSV Series - Page 276

12 - 8
STEERING SYSTEM
STEERING MACHINE DISASSEMBLY (EPS MODELS)
【A】Nut
【B】Steering rod
【
C
】
Bolt
【D】Direction machine
◆
Remove the nuts on both sides of the steering rod
wheel 【A】, and knock the steering rod in the
direction of the arrow with a hammer to separate the
steering rod from the cone of the steering knuckle;
!
Be careful not to damage the threaded part when
knocking on the steering rod.
◆
Remove the steering gear end nut
【
A
】
of the
steering tie rod, and knock the steering tie rod in the
direction of the arrow with a hammer to separate the
steering tie rod from the cone of the steering wheel;
!
Be careful not to damage the threaded part when
knocking on the steering rod.
◆ Remove the 5 fixing bolts 【C】, and remove the
steering wheel
【
D
】
;
A
B
B
B
A
C
D
C