The safety laser scanner is not suitable for the following applications, among others:
•
Out
doors
•
Underwater
•
In explosion-hazardous areas
2.4 Cybersecurity
Overview
T
o protect against cybersecurity threats, it is necessary to continuously monitor and
maintain a comprehensive cybersecurity concept. A suitable concept consists of organi‐
zational, technical, procedural, electronic, and physical levels of defense and considers
suitable measures for different types of risks. The measures implemented in this
product can only support protection against cybersecurity threats if the product is used
as part of such a concept.
You will find further information at www.sick.com/psirt, e.g.:
•
General information on cybersecurity
•
Contact option for reporting vulnerabilities
•
Information on known vulnerabilities (security advisories)
Communication interfaces
•
U
SB
•
Ethernet for EFI-pro, data output, configuration, and diagnostics
•
Display and pushbuttons
Further topics
•
"N
etwork services and ports", page 73
•
"Managing passwords", page 146
•
"Access management", page 147
2.5 Requirements for the qualification of personnel
The product must be configured, installed, connected, commissioned, and serviced by
q
ualified safety personnel only.
Project planning
You need safety expertise to implement safety functions and select suitable products
for that purpose. You need expert knowledge of the applicable standards and regula‐
tions.
Mounting, electrical installation and commissioning
Y
ou need suitable expertise and experience. You must be able to assess if the machine
is operating safely.
Configuration
Y
ou need suitable expertise and experience. You must be able to assess if the machine
is operating safely.
Operation and maintenance
Y
ou need suitable expertise and experience. You must be instructed in machine oper‐
ation by the machine operator. For maintenance, you must be able to assess if the
machine is operating safely.
2 S
AFETY INFORMATION
12
O P E R A T I N G I N S T R U C T I O N S | microScan3 Pro I/O 8025424/1ELL/2022-01-21 | SICK
Subject to change without notice