SICK microScan3 Pro I/O User Manual

1 About this document
1.1 Function of this document
These operating instructions contain the information needed during the life cycle of the
s
afety laser scanner.
Operating instructions of the safety laser scanner must be made available to all people
who work with the device.
Read the operating instructions carefully and ensure that you have understood the
contents completely before you work with the safety laser scanner.
1.2 Scope
Product
T
his document applies to the following products:
•
Product code: microScan3 Pro I/O
•
“Operating instructions” type label entry: 8025422
Document identification
Doc
ument part number:
•
This document: 8025424
•
Available language versions of this document: 8025422
You can find the current version of all documents at www.sick.com.
1.3 Target groups of these operating instructions
Some chapters of these operating instructions are intended for certain target groups.
Ho
wever, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected chapters of these operating instructions
Target group Chapters of these operating instructions
Project developers (planners, developers,
de
signers)
"Project planning", page 25
"Configuration", page 97
"Technical data", page 178
"Accessories", page 208
Installers "Mounting", page 85
Electricians "Electrical installation", page 90
Safety experts (such as CE authorized repre‐
sent
atives, compliance officers, people who
test and approve the application)
"Project planning", page 25
"Configuration", page 97
"Commissioning", page 149
"Technical data", page 178
"Checklist for initial commissioning and com‐
missioning", page 216
Operators "Operation", page 152
"T
roubleshooting", page 166
Maintenance personnel "Maintenance", page 159
"T
roubleshooting", page 166
1.4 Further information
www.sick.com
T
he following information is available via the Internet:
1 A
BOUT THIS DOCUMENT
8
O P E R A T I N G I N S T R U C T I O N S | microScan3 Pro I/O 8025424/1ELL/2022-01-21 | SICK
Subject to change without notice

SICK microScan3 Pro I/O Specifications

General

Scanning angle	275°
Number of fields	128
Dimensions	102 mm x 152 mm x 106 mm
Number of safety outputs	2
Number of OSSD outputs	2
Scanning range	5.5 m
Protective field range	5.5 m
Resolution	30 mm
Number of monitoring cases	128
Response time	60 ms
Interfaces	Ethernet, USB
Operating temperature	+50 °C
Protection class	IP65
Supply voltage	24 V DC
Storage temperature	+70°C
Operating voltage	24 V DC (16.8 V DC ... 28.8 V DC)
Housing material	Plastic
Connection type	Male connector