SICK microScan3 Pro I/O User Manual

Display reference contour field
Y
ou determine whether the reference contour field is displayed.
Drawing surface
Y
ou can use a Cartesian or a polar coordinates system and select the colors for the grid
and the drawing area.
b
Select the Cartesian option.
✓
The coordinates system is shown as a Cartesian coordinates system.
b
Select the Polar option.
✓
The coordinates system is shown as a polar coordinates system.
b
Select Color of the grid.
✓
The field editor’s grid is displayed in the chosen color.
b
Select Color of the drawing surface.
✓
The field editor’s drawing area is displayed in the chosen color.
7.11.6 Editing fields using coordinates
You can use coordinates to edit fields. Depending on the form on which a field is
ba
sed, the appropriate input fields are displayed. The example shows a dialog box for a
rectangle.
7 C
ONFIGURATION
124
O P E R A T I N G I N S T R U C T I O N S | microScan3 Pro I/O 8025424/1ELL/2022-01-21 | SICK
Subject to change without notice

SICK microScan3 Pro I/O Specifications

General

Scanning angle	275°
Number of fields	128
Dimensions	102 mm x 152 mm x 106 mm
Number of safety outputs	2
Number of OSSD outputs	2
Scanning range	5.5 m
Protective field range	5.5 m
Resolution	30 mm
Number of monitoring cases	128
Response time	60 ms
Interfaces	Ethernet, USB
Operating temperature	+50 °C
Protection class	IP65
Supply voltage	24 V DC
Storage temperature	+70°C
Operating voltage	24 V DC (16.8 V DC ... 28.8 V DC)
Housing material	Plastic
Connection type	Male connector