SICK microScan3 Pro I/O User Manual

7.6 Identification
Overview
Figure 67: Identification
1
Parameters for the project and the device
In the Ident
ification dialog box, you can optionally enter names and information to
uniquely identify the application, project, and devices.
Device name
If a number of safety laser scanners are used in an application or in a project, a unique
device name helps to tell the individual devices apart.
b
Give each device a unique device name.
Project name
T
he project name is used to identify an entire project. The same project name should
be chosen for all devices in the project.
b
Enter a project name.
Application name
T
he application name can be the same for a number of devices in the project. It
highlights that these devices realize an application together, by responding to one
another for example.
b
Enter an application name.
CONFIGURATION 7
8025424/1ELL/2022-01-21 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 Pro I/O
107
Subject to change without notice

SICK microScan3 Pro I/O Specifications

General

Scanning angle	275°
Number of fields	128
Dimensions	102 mm x 152 mm x 106 mm
Number of safety outputs	2
Number of OSSD outputs	2
Scanning range	5.5 m
Protective field range	5.5 m
Resolution	30 mm
Number of monitoring cases	128
Response time	60 ms
Interfaces	Ethernet, USB
Operating temperature	+50 °C
Protection class	IP65
Supply voltage	24 V DC
Storage temperature	+70°C
Operating voltage	24 V DC (16.8 V DC ... 28.8 V DC)
Housing material	Plastic
Connection type	Male connector