Overview
1.1 Product description
ITC V3, ITC V3 PRO
14 Operating Instructions, 03/2024, A5E42761061-AF
ITC Operating mode
In the ITC operating mode, the Industrial Thin Client always communicates with a host, such
as an HMI device, industrial PC, or server, via the following connection types:
• Web browser functionality
• SIMATIC WinCC Sm@rtServer
• Standard RDP (Remote Desktop Protocol) from Microsoft
• VNC (Virtual Network Computing)
• On-demand application service from Citrix
• WinCC OA
You can do the following from the Industrial Thin Client:
• Display and run web-based content from a web server available on the network (e.g., S7
controller, Intranet/Internet) via the integrated web browser.
• Run WinCC projects on other HMI devices or industrial PCs via Sm@rtServer.
• Run HMI applications (e.g., WinCC), Office applications (e.g., Excel), or SAP directly at the
machine via RDP.
• Operate a PC remotely with VNC (similar to RDP).
• Access a Citrix server as Citrix client.
• Access a WinCC OA server as client.
You will find the description of the ITC operating mode in Section "ITC Operating mode
(Page 77)".
SINUMERIK operating mode
In SINUMERIK operating mode, the Industrial Thin Client behaves like a SINUMERIK operator
panel face with built in Thin Client Unit TCU.
You will find the description of the SINUMERIK operating mode in Section "SINUMERIK
operating mode (Page 127)".
To Next Page
Loading...
