Overview
1.1 Product description
ITC V3, ITC V3 PRO
Operating Instructions, 03/2024, A5E42761061-AF
15
Features
Installation compatibility
The Industrial Thin Client built-in units are compatible with SIMATIC Industrial PCs, Industrial
Flat Panels, HMI devices and SINUMERIK TOP Panels of the same series.
Front
• Integrated glass front, anti-reflective coating, resistant to scratches and chemicals
• Brilliant 12"-, 15"-, 19"-, 22"- or 24" TFT display with 16 million colors
Touch screen
• Capacitive touch screen
• Suitable for operation with glove, pen and finger
• Detection of accidental contact
IP65 fully-enclosed
The Thin Client PRO with an IP65 protection class housing features all-round dust- and hose
water protection. The ready-to-use HMI device can be mounted either from the top or the
bottom to a support arm system or to a pedestal.
A basic adapter and adapter sets that can be ordered separately support mounting systems
from various manufacturers (including VESA standard for flat screens). The rear panel can be
easily opened. The interfaces of the HMI device can therefore be reached without problem.
Special cables or plugs are not required.
The Thin Client PRO is impressive not only on account of its ease of servicing but also due to
its sophisticated design and slimline device depth.
Easy commissioning
The Industrial Thin Client merely requires an IP address. For fast on-site commissioning and
diagnostics, the SIMATIC ITC is equipped with a Setup Wizard optimized for touch operation.
Local software installation on the device is not necessary. The display and user interface of
the application are provided by the host.
High robustness
As a remote operator terminal without any rotating media (hard drive or fan), you can
operate the Industrial Thin Client on machines having stringent requirements for mechanical
robustness.
To Next Page
Loading...
