Siemens SIMOCODE pro

System description
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
1-107
1.7.9 Accessories
The following figure shows accessories that are independent of the device
series:
Fig. 1-40: Accessories
PC cable
For device parameterization, for connecting a PC to the system interface of
a basic unit via the serial interface of the PC.
USB to serial adapter
For connecting a RS-232 cable to the USB interface of a PC.
Memory module
Allows system parameterization to be backed up completely and be
transferred to a new system without additional resources or specialist
expertise, for example if the device is replaced (see Chapter 14.3.3)
Addressing plug
For the hardware-related allocation of the PROFIBUS DP address to
SIMOCODE pro without a PC/PD via the system interface.
Setting the PROFIBUS DP address with an addressing plug:
See Chapter 14.2.2.
PC cable
Memory module
Addressing plug
Connecting cable
Door adapter Adapter forSystem interface
cover
USB to serial adapter
Operator panel