Siemens SIMOCODE pro

Data formats and data records
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
B-55
B.21.11 Solenoid valve
Table B-32: Assignment of cyclic receive/send data, solenoid valve
*) for SIMOCODE pro V, basic type 1 only
Cyclic receive data
Bit 0.0 Not connected
Bit 0.1 Device parameters -> Motor control -> Control stations -> PLC/PCS [DP] -> CLOSED
Bit 0.2 Device parameters -> Motor control -> Control stations -> PLC/PCS [DP] -> OPEN
Bit 0.3 Further function blocks -> Standard functions - Test/Reset -> Test 1 - Input
Bit 0.4 Not connected
Bit 0.5 Device parameters -> Motor control -> Control stations -> Mode selector S1
Bit 0.6 Further function blocks -> Standard functions -> Test/Reset -> Reset 1 - Input
Bit 0.7 Not connected
Bit 1.0 Not connected
Bit 1.1 Not connected
Bit 1.2 Not connected
Bit 1.3 Not connected
Bit 1.4 Not connected
Bit 1.5 Not connected
Bit 1.6 Not connected
Bit 1.7 Not connected
Byte 2/3 *) (analog value) Not connected
Cyclic send data
Bit 0.0 Not connected
Bit 0.1 Status - OFF (Closed)
Bit 0.2 Status - ON > (Open)
Bit 0.3 Not connected
Bit 0.4 Not connected
Bit 0.5 Status - Remote mode
Bit 0.6 Status - General fault
Bit 0.7 Status - General warning
Bit 1.0 Not connected
Bit 1.1 Not connected
Bit 1.2 Not connected
Bit 1.3 Not connected
Bit 1.4 Not connected
Bit 1.5 Not connected
Bit 1.6 Not connected
Bit 1.7 Not connected
Byte 2/3 (analog value) Not connected
Byte 4/5 *) (analog value) Not connected
Byte 6/7 *) (analog value) Not connected
Byte 8/9 *) (analog value) Not connected