Siemens SIMOCODE pro System Manual

Logic modules
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
11-3
11.2 Truth table 3I/1O
Description
Truth table 3I/1O consists of:
• Three plugs
• One logic component
• One socket.
You can choose from eight possible input conditions the ones with which to
generate an output signal.
Overall, the following are available:
– Three truth tables, 1 to 3 for BU1
– Six truth tables, 1 to 6 for BU2.
Schematic
The following schematic shows the "Truth Table for 3I/1O" logic modules:
Fig. 11-2: "Truth Table for 3I/1O" logic modules
Truth Table 1 3I/1O
Input 1
Input 2
Input 3
Output
Truth Table 3 3I/1O
Input 1
Input 2
Input 3
Output
Truth Table 5 3I/1O
Input 1
Input 2
Input 3
Output
Truth Table 2 3I/1O
Input 1
Input 2
Input 3
Output
Truth Table 4 3I/1O
Input 1
Input 2
Input 3
Output
Truth Table 6 3I/1O
Input 1
Input 2
Input 3
Output

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000