Siemens SIMOCODE pro System Manual

Data formats and data records
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
B-5
B.1.3 Specifications
The following specifications apply in the tables:
Fig. B-2: Specifications
Settings are valid/can only be made when the corresponding system
components are used.
Designation Type Range Unit Information
Reserved Byte[4]
Cos phi Byte 0 .. 100 1 % BU2
Reserved Byte[5]
Max. current I_max Word 0 .. 65535 1 % / I
s
BU1 BU2
Entry relevant for basic unit
and basic unit 2
Example
Entries in italics are
not relevant (reserved)
and, when writing,
should be filled with "0"
Parameters can be changed while running.

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000