Siemens SIMOCODE pro System Manual

Table of contents
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
ix
E.15.4 Circuit diagram "Soft starter with reversing contactor"
(3RW405, 3RW407) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-49
E.16 "Direct starter for 1-phase loads" circuit example . . . . . . . . . . . . . . . E-50
E.16.1 "Direct starter for 1-phase loads" circuit example . . . . . . . . . . . . . . . E-50
E.16.2 "Direct starter for 1-phase loads" function circuit example . . . . . . . . . . E-51
F Safety and commissioning information for EEx areas. . . . . . . . . . . F-1
F.1 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-2
F.2 Set-up and commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-3
F.2.1 Setting the rated motor current . . . . . . . . . . . . . . . . . . . . . . . . . . F-4
F.2.2 SIMOCODE pro with thermistor input . . . . . . . . . . . . . . . . . . . . . . F-5
F.2.3 Sensor circuit wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-6
F.2.4 Short-circuit protection for type of assignment 2 according to
IEC 60947-4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-6
F.2.5 Cable protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-6
F.2.6 Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-7
F.2.7 Further safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-8
F.2.8 Ambient conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-8
F.2.9 Safety data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-8
F.3 Maintenance and repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-9
F.4 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-9
F.5 Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-10
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
List of abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Abbreviations-1
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glossary-1

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000