Siemens SIMOCODE pro System Manual

Motor control
SIMOCODE pro
4-58 GWA 4NEB 631 6050-22 DS 03
Feedback time Range 0 - 25.5 seconds (0.5 s)
Execution time Time until the end position is reached.
Range 0 - 6553.5 seconds (1.0 s
)
Interlocking time Range 0 - 255 seconds (0 s
)
Positioner Description
Table 4-18: Positioner control function settings (Cont.)

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000