Siemens SIMOCODE pro System Manual

Inputs
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
7-3
Extent and application
Inputs are used, for example, to input external signals e.g. via pushbuttons,
key-operated switches, etc. These external signals are processed further
internally via appropriate connections. The system has different inputs
depending upon the device series:
SIMOCODE
Inputs pro C (BU1) pro V (BU2)
Basic unit inputs (BU Inputs) ✓ ✓
Operator panel buttons (OP Buttons) ✓ ✓
Digital module 1 inputs (DM1 Inputs) — ✓
Digital module 2 inputs (DM2 Inputs) — ✓
Temperature module inputs (TM Inputs) — ✓
Analog module inputs (AM Inputs) — ✓
Acyclic Receive (Acycl. Receive) ✓ ✓
Cyclic Receive (Cycl. Receive) ✓ ✓
Table 7-1: Inputs

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000