Siemens SIMOCODE pro

Communication
SIMOCODE pro
12-14 GWA 4NEB 631 6050-22 DS 03
Channel-related diagnostics - definition
Channel-related diagnosis is a detailed version of the identification-related
diagnostics. It supplies information about the device faults of
SIMOCODE pro.
Channel-related diagnostics - configuration
The channel-related diagnostics is configured as follows:
Fig. 12-7: Configuration of the channel-related diagnostics
The block for the channel-related diagnostics, which has a length of 3 bytes,
is either missing (if there is no channel-related diagnostics) or is available
once or twice.
Error types
The diagnostic message is output on channel 0.
Table 12-7: Error types
No. Error type Meaning/cause
F9 01001:
Error
• Internal fault/device fault
• Error during self-test
Exact information: See
Chapter B.8 "Data record
92 - Device diagnostics".
F16 10000:
Parameterization
error
• Incorrect parameter value
1 0 0 0 0 0 x x
765 0
Byte 28
Bit number
Code for channel-related diagnostics
1 1 0 0 0 0 0 0
765 0
Byte 29
Bit number
Input/output channel
765 0
Byte 30
Bit number
Channel type:
Error type 9 or 16 (table below)
000
B
: No special channel type
Byte 31 to
Next channel-related diagnostic message
(Allocation as for byte 28 to 30)
byte 33
0 0 0
0x80 GSD
0x83 OM SIMOCODE pro