Siemens SIMOCODE pro

System description
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
1-31
Test/Reset button:
Enables the device to be reset after tripping or after a fault has occurred and
makes it possible to test the device/motor feeder with or without tripping
the contactor control. If a memory module or addressing plug is plugged in,
the PROFIBUS address can be parameterized or adopted via the Test/Reset
button.
For more information see Chapter 10.2 "Test/Reset", Chapter 14.2.2 and
Chapter 14.3.2.
System interfaces:
2 system interfaces for connecting
• A current measuring module or a current/voltage measuring module
• Expansion modules and
• An operator panel.
Supplying the inputs
See Chapter 13 "Mounting, wiring, interfaces".