Siemens SIMOCODE pro System Manual

Technical data
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
D-3
1)
For 3UF721 operator panel with display 0 °C - 60 °C
2)
For 3UF721 operator panel with display -20 °C - 70 °C
3)
For 3UF721 operator panel with display 4 kV
Table D-1: Common technical data
This is a Class A product. This product can
cause radio interference if used in a
domestic environment. Therefore, the user
may need to implement suitable
countermeasures.
Conducted and emitted
interference
DIN EN 55011/DIN EN 55022 (CISPR11/CISPR22)
(corresponds to Degree of Severity A)
Safe isolation
according to IEC 60947-1
All SIMOCODE pro circuits are isolated from each other
according to IEC 60947-1, i.e. dimensioned with double
creepage distance and air clearance.
Notice
Please observe the information in the "Safe Isolation" test
report, No. 2668.
Connecting cable 3UF73
•Rated voltage
•Rated operating voltage
300 V
24 V

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000