Siemens SIMOCODE pro System Manual

Technical data
SIMOCODE pro
D-18 GWA 4NEB 631 6050-22 DS 03
Table D-8: Technical data of the DM-F PROFIsafe fail-safe digital module
Safety-related technical data of the DM-F Local and DM-F PROFIsafe digital modules:
See chapter "Technical Data" in the system manual "Failsafe Digital Modules
SIMOCODE pro Safety".
Input with safety relay
function
•1 feedback circuit input 24 V DC (91/FBC)
•For contactor monitoring of the motor and incoming supply
contactors via series-connected auxiliary switch normally-closed
contacts
•Supply via terminal 90/T
Cable length (single) 300 m
Input characteristic
Type 2 according to EN 61131-2

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000