EasyManuals Logo

Siemens SIMOCODE pro System Manual

Siemens SIMOCODE pro
694 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #685 background imageLoading...
Page #685 background image
Glossary
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
Glossary-13
Programmable logic controller (PLC)
A controller whose functions are stored as a program on the
control device. The PLC consists of a CPU, memory, input/
output modules and an internal bus system. The I/O devices
and the programming language are based on the needs of the
control engineering.
Programming device
A compact and transportable PC, suitable for industrial
purposes. It is characterized by a special hardware and
software configuration for SIMATIC programmable logic
controllers.
Protective extra low voltage (PELV)
Protective measure against electric shock (previously
"protective extra low voltage with safe isolation").
Active components and exposed conductive parts may be
grounded and connected to the protective conductor in
contrast to SELV. Safe isolation means that the primary circuit
of the transformer must be isolated from the secondary
circuit by means of double or reinforced insulation. PELV is
used where active low voltage conductors or exposed
conductive parts must be grounded. This is the case, for
example, if equipotential bonding is required to prevent
sparks in containers and hazardous areas. However
dangerous leakage currents can flow over the exposed
conductive parts through the enclosure ground (independent
of the low voltage), if faults occur in the higher-level network.
SELV
Safety extra low voltage
Low electric voltage (up to 50 V AC or 120 V DC), that offers
significant protection against electric shock due to its low
value and insulation.
Devices that are operated with SELV and do not generate
high voltages are categorized as Class III according to DIN EN
61140 (VDE 0140-1).
SFB
System function block
A block integrated in the S7 CPU operating system that can
be called like a function block (FB) in the user program if
required.
SFC
System function:
A function integrated in the S7 CPU operating system that
can be called like a function (FC) in the user program if
required.

Table of Contents

Other manuals for Siemens SIMOCODE pro

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMOCODE pro and is the answer not in the manual?

Siemens SIMOCODE pro Specifications

General IconGeneral
Protection ClassIP20
Mounting TypeDIN rail mounting
Rated Operational Voltage24 V DC
Rated CurrentUp to 820 A
Protection FunctionsOverload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range-25°C to +60°C
Communication ProtocolsPROFIBUS DP, PROFINET, Modbus RTU
Analog OutputsUp to 2
Temperature MonitoringPTC/KTY, RTD (PT100/PT1000)
Digital OutputsRelay outputs, Solid-state outputs
Analog Inputs0/4-20mA, PT100/PT1000

Related product manuals