Siemens SIMOCODE pro System Manual

www.siemens.com/automation
Subject to change without prior notice
Order No.: 3UF7970-0AA00-0
© Siemens AG 2011
Siemens AG
Industry Sector
Postfach 23 55
90713 FÜRTH
GERMANY
Service & Support
Internet:
www.siemens.com/simocode
Information and Download Center:
www.siemens.com/industrial-controls/infomaterial
Newsletter – always up to date:
www.siemens.com/industrial-controls/newsletter
E-Business in the Industry Mall:
www.siemens.com/industrial-controls/mall
Product Information System (ProdIS):
www.siemens.com/industrial-controls/support
ATEX:
www.siemens.com/industrial-controls/atex
Certificates:
www.siemens.com/industrial-controls/approvals
Contact for all technical information:
Technical Assistance
Tel.: +49 (911) 895-5900
E-Mail: technical-assistance@siemens.com
www.siemens.com/industrial-controls/technical-assistance

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000