Siemens SIMOCODE pro System Manual

System description
SIMOCODE pro
1-68 GWA 4NEB 631 6050-22 DS 03
Permissible starts - Actual value
(example)
One more only, No start
Motor stop time (example)
Motor stop time > Displays overshooting of the stipulated limit for motor stop time
monitoring.
Energy consumed (example)
Note
Only possible if a current/voltage measuring module is being used.
Table 1-13: Display of statistical and maintenance-relevant information on the
statistics/maintenance display (Cont.)

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000