Line Modules Booksize
4.1 Safety instructions for Line Modules Booksize
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
151
Danger to life through electric shock due to missing DC link side covers
There is a danger of an electric shock through contact when the side covers of the DC link
are missing.
• Mount the side covers on the first and last component in the drive line-up.
• Order any missing side covers (Article number: 6SL3162-5AA00-0AA0).
Fire hazard due to overheating because of inadequate ventilation clearances
Inadequate ventilation clearances can cause components to overheat. This can result in
severe injury or death due to fire and smoke. This can also result in more downtimes and
reduced service lives of Line Modules.
• Maintain the 80 mm clearances above and below the Line Modules.
• For the 80 kW and 120 kW Active Line Modules, in addition to the specified minimum
clearances, a ventilation clearance of 50 mm must also be maintained in front of the fan.
Fire hazard due to overheating when the required cable cross-sections of power cables is
fallen below
Power cables with excessively low cross-sections can cause them to overheat. This can
result in severe injury or death due to fire and smoke.
• Only use power cables with sufficiently large cross-sections. Take into account the
routing type, ambient temperature and cable length.
Fire hazard due to overheating when the total length of the power cables is exceeded
Overheating can result when the total length of the power cables is exceeded. This can
result in severe injury or death due to fire and smoke.
• Ensure that the total length of all power cables (motor supply cables and DC link cables)
does not exceed the values specified in Section Combination options, Line Modules with
line reactors and line filters (Page 135).
To Next Page
Loading...
