Siemens SINAMICS S120

Accessories
11.7 DRIVE-CLiQ coupling
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
661
Installation
1. Attach the DRIVE-CLiQ coupling to the mounting surface as shown in the drilling pattern.
2. Remove the protective caps of the DRIVE-CLiQ coupling.
3. Latch the DRIVE-CLiQ connectors at both sides of the DRIVE-CLiQ coupling.
11.7.5
Technical data
Table 11- 27 Technical data
DRIVE-CLiQ coupling 6SL3066-
2DA00-0AB0
Unit
Weight
kg
0.272
Degree of protection IP67 according to IEC 60529