Accessories
11.5 DC link adapter
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
645
3. Fix the DC link adapter (1.8 Nm) with the pre-
viously removed DC link screws
1)
.
When installing using two screws, use the
holes ①.
1)
Observe the special issues when using rein-
forced DC link busbar (refer below)
4. Remove the DC link side cover, install the 24 V
terminal adapter (if required) and close the pro-
tective cover until it audibly clicks into place.
Result:
Installed DC link adapter and 24 V terminal
Danger to life through electric shock when touching the DC link busbars
Contact with live parts can result in death or serious injury.
• The DC link adapters must be installed so that after closing the DC link cover they
cannot be touched!
To Next Page
Loading...
