Accessories
11.5 DC link adapter
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
651
5. Tighten the screw of the hose clamp using a
suitable screwdriver.
6. Fix the second conductor of the DC link con-
necting cable to the profile rail using a cable
clamp.
Connect the cable for the DCP connection as
described under Points 2 to 5.
The installed DC link connecting cable is shown
in the adjacent diagram.
Note
After installing the cables, ensure that the EMC tongues of the DC link adapter are in contact
with the side panel of
the component.
To Next Page
Loading...
