Service and Support Booksize
14.1 Replacing the fan
Booksize Power Units
800 Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
4. Release the connector and remove the connecting cable.
Table 14- 7 Installing a fan
1. Observed the air flow direction before installing the fan (the arrow on the fan must point towards the cooling ribs).
2. Insert the connector until it latches into place.
3. Install the fan.
When doing this ensures that the connecting cables are not crushed.
4. Attach the fan cover.
To Next Page
Loading...
