Procedure
Proceed as follows to insert a technology object into the controller:
1. In the project tree, expand the "Technology objects" entry under the menu for the SIMATIC S7
controller.
2. Double-click the "Add new object" entry.
The corresponding dialog opens.
Commissioning (S
tartdrive)
8.5Combining and conguring devices in t
he project
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 249
To Next Page
Loading...
