Siemens SINAMICS SIMOTICS S200 PROFINET - Page 264

Note
Displaying the actual mo
tor data
The actual motor data of the drive are shown in dialog "Show motor data". The dialog can be
opened using button "Show motor data". The following values can be con󹪝gured:
• Supply voltage
• Motor ambient temperature
• Direction of rotation
Requirement
• The mot
or used in the device con󹪝guration of the drive has been completely speci󹪝ed and
con󹪝gured.
• Control mode "Positioning" is activated in the quick startup step "Application".
When "Speed control" is active other settings are displayed.
• For activated user management (UMAC):
The function rights for con󹪝guring in the quick startup are activated for your user role.
Details on this topic are provided in Chapter "Security settings in Startdrive" of Industrial
Cybersecurity Con󹪝guration Manual (
https://support.industry.siemens.com/cs/ww/en/view/
109810578).
Commissioning (Startdrive)
8.6Carrying out guided quick startup
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
262 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB