Siemens SINAMICS SIMOTICS S200 PROFINET - Page 39

6. In󹪞uence of networ
k-connected and wireless communications systems, e.g. ripple-control
transmitters or data communication via the network or mobile radio, WLAN or Bluetooth.
7. Motors for use in potentially explosive areas:
When moving components such as bearings become worn, this can cause enclosure
components to exhibit unexpectedly high temperatures during operation, creating a hazard
in areas with a potentially explosive atmosphere.
For more information about the residual risks of the drive system components, see the
relevant sections in the technical user documentation.
Fundamental safety instructions
2.5Residual risks of power drive systems
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 37