Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

Text of the message class Number ac‐
cording to
PR
OFIdrive
Diagnostics inter‐
face
Cause and remedy PN
(hex)
DS1
(dec)
Communication error t
o the higher-level controller
The communication to the higher
-level controller (internal cou‐
pling, PROFIBUS, PROFINET...) is faulted or interrupted.
• Check the state of the higher-level control system.
• Check the communication connection/wiring.
• Check the bus con󹪝guration/clock cycles.
(9) 9008 8
Safety monitoring channel has identi󹪝ed an error
A safe oper
ation monitoring function (Safety) has detected an
error.
(10) 9009 9
Actual position value/actual speed value incorrect or not
available
An
illegal signal state was detected while evaluating the encoder
signals (track signals, zero marks, absolute values…).
• Check the encoder/status of the encoder signals.
• Observe the maximum permissible frequencies.
(11) 900A 10
Internal (DRIVE-CLiQ) communication error
The internal
communication between the SINAMICS components
is faulted or interrupted.
• Check the DRIVE-CLiQ wiring.
• Ensure an EMC-compliant design.
• Observe the maximum quantity structure/cycles.
(12) 900B 11
Infeed fault
The infeed is faulted or has failed.
•
Check the infeed and its environment (line supply, 󹪝lters, re‐
actors, fuses…).
• Check the infeed control.
(13) 900C 12
Braking controller/Braking Module faulted
The internal
or external Braking Module is faulted or overloaded
(temperature).
• Check the connection/state of the Braking Module.
• Comply with the permissible number of braking operations
and their duration.
(14) 900D 13
Line 󹪝lter fault
ed
The line 󹪝lter monitoring has identi󹪝ed an excessively high tem‐
perature or other inadmissible state.
• Check the temperature/temperature monitoring.
• Check the con󹪝guration to ensure that it is permissible (󹪝lter
type, infeed, thresholds).
(15) 900E 14
System messages
12.3Faults and alarms
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 433

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English