‰ To remove accidentally selected items, touch them within the lower scroll window to deselect them from the source
l
ist. Once you have selected the required file(s), press $ , and you will see the file(s) appear in the (?DA35 window
of the ?@H69<5B pop-up (upper screenshot on previous page).
‰ To choose a suitable destination, touch the blue bar below the 5BC9>1C9?> legend, and the disk navigation
window will appear again, but this time only showing folders.
The system’s own hard disk is normally selected, but any other network location can also accessed here, by pressing the
blue #("?D>C box to the left of the pop-up and selecting the location from the resultant pop-up.
Projects can also be copied via the Linux file management system using the terminal.
‰ To cut down the length of any of the lists, simply enter a keyword to show any filename that includes it while all others
will be hidden (and vice versa). Simply enter the keyword after pressing the blue bar at the bottom of the pop-up, and
then choose "1C385B or "9BB5B next to the (51A38 legend on the left hand side.
‰ The lists may also be sorted by selecting (next to the (?AC legend) from the options )H@5, (9I5, A51C51C5,
"?496H1C5, and #1=5.
‰ Once you are inside the desired destination folder, press the DAA5>C9A box and you will see the path of that
folder appear under the 5BC9>1C9?> legend – if all is correct, press (C1AC?@H and you will see the grey progress
bar turn gradually yellow as the process is completed! Otherwise you may go back into either navigation window to change
the source(s) and/or destination, or touch anywhere outside the ?@H69<5B pop-up to cancel it.
Page 5-8 | Section 5: System Administration C10 HD Installation Manual
File Menu
To Next Page
Loading...
Need help?
General