C10 HD Installation Guide Section 4: Configuration | Page 4-5
$&#( )$
Projects backed-up via the Copy button in the Project menu will be located in the Project Backup folder and can then be
archived to the local PC disk, a removable storage device such as a USB memory stick, or to networked storage.
(&"'&'
The Transfers folder is a bridge between the C10 system File system and an external PC. The Transfer Folder is visible in
the Copy menu available from the STUDIO File Menu commands detailed later in this section and any files copied to that
directory can then be transferred to a folder on the local PC or archived as required. Files edited on the PC can, in turn,
be placed in the Transfers folder and then copied back into the C10 system folder. The Transfers folder provides a simple
mechanism for transferring diagnostic logs and text based configuration files, such as the lists that define the C10 Free
Controls, GPIO functions and DAW control menus, so that they can be edited on a PC.
File Transfer and Backup
To Next Page
Loading...
Need help?
General