C10 HD Installation Guide Section 4: Configuration | Page 4-7
##")&(#"
'(
$
#
""(#"'
Ensure that the system is connected and powered according to the Installation section and any additional facility-specific
interconnection drawings.
'(
$
'(
&()$
#
"'# "
#
"
‰ Power up the console.
Once the console has fully booted, log in as Administrator:
‰ Touch the padlock button towards the bottom right-hand corner of the Touchscreen:
This will activate the login display:
‰ Touch 3<8=8AB@0B>@, enter the Administrator password in the keyboard which appears, and touch #.
The Administrator password is initially simply set to ‘A’. For details regarding changing the user-level passwords, see
Tutorial B.
Project Information Strip
A: IO Configuration
To Next Page
Loading...
Need help?
General