"$'(()*%
If your C10 HD is connected to a MORSE system, the "$'((5CD@ pop-up (see below) must be configured correctly
before you will be able to take full advantage of the IO available via a MORSE router.
Unless there is a tick in the "$'(>12<54 box, none of the other options on this pop-up will be available.
Note also that you will be unable to access the MORSE options here unless the IP pop-up in the Network menu
(see Page 5-39) has been configured.
See Appendix B for more details.
Page 5-36 | Section 5: System Administration C10 HD Installation Manual
System Administration
To Next Page
Loading...