! "!
3974*:)9/43
/1+!7'38,+7'3*')0:5
IP Address and Names 4-2
Accessing C10 Shared Folders 4-3
System Backup 4-4
Project Backup 4-5
Transfers 4-5
Eyeconix 4-6
Image Specifications 4-6
Updates 4-6
43,/-:7'9/43
Step A1: Check Connections. 4-9
Step A2: Startup Console and Login. 4-9
Step A3: Enter the Routing configuration pages. 4-10
Step A4: Configure MADI connections. 4-11
Alpha-Link Configuration 4-12
Step A5: Name and bundle the IO. 4-13
Grouping multi-channel components: 4-14
Customising IO names: 4-15
Step A6: Group the IO 4-16
Step A7: Select signals for the Quick-Routing function. 4-18
Step A8: Assign fixed routing. 4-19
Step A9: Check the new IO configuration. 4-21
Assigning input sources to channels: 4-21
Routing the channel to the Programme bus: 4-21
Auditioning the Programme bus on the monitors: 4-21
43841+43,/-:7'9/43
Step B1: Set the Boot Project 4-23
Step B2: Set Passwords 4-24
Step B3: Create Projects 4-25
Step B4: Assign Centre Section and Touchscreen Softkeys 4-26
Default Project Softkey Assignments: 4-26
The Centre Section Function display 4-27
Step B5: Assign Channel Softkeys 4-28
Step B6: Configure Fader Layers 4-29
Step B7: Name Busses, Softkeys and Layers 4-32
Naming Softkey Assignments 4-33
Step B8: Assign Projects to USER MODES Buttons 4-34
Step B9: Upload Eyeconix Images 4-35
Step B10: Further Preset-Level User Configuration. 4-36
Presets 4-36
Control Linking 4-38
Contents
C10 HD Installation Manual Section 1: Introduction | Page iii
To Next Page
Loading...
Need help?
General