Spectra Stack Tape Library - Page 93

10.Click Next. The Assign Drives screen displays.
Figure38 The Assign Drives screen.
11.In the Assign Drives screen, use the >> and << buttons to assign drives to the
new partition.
12.Click Next. The Select Library LUN Drive screen displays.
Figure39 The Select Library LUN Drive screen.
13.If the partition has multiple tape drives, select the drive to host the SCSI
communication for the partition.
Note: The lowest numbered drive in the partition is selected as the default.
JANUARY 2023 93
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 3 - CONFIGURING THE LIBRARY