Field Setting
IPEI (Optional) If a specific handset is being subscribed for this user,
enter the IPEI number of the actual handset (the IPEI
number is readable from the label on the product). If this
is not the case, this field can be left empty and it will auto-
fill when the handsets subscribe.
Note: A SIP REGISTER will not be sent before there is
an IPEI number present.
Note: Programming of IPEI number into the system data-
base is necessary to enable service to the handset.
Note: If handset sharing is used, the IPEI label will be a
link, that you can click on and link to a device. For more
information, see "Adding Devices to Server" on
page209.
Access code (Optional) Administrators can define a system wide or individual
access code as extra wireless security during the sub-
scription process.
Note: Some 3rd party phones may need an Access code
to register to the Spectralink IP-DECT Server.
User - User
PIN code (Optional)(Only visible
if Handset Sharing License is
loaded)
Enter a code in the PIN code field for added security to
prevent other users from linking a handset with your user
profile.
The PIN code associates the user with a handset. For
more information, see "User Sign-in/Sign-out" on
page201. See also Lync/Skype for Business Inter-
operability Guide.
Standby text (Optional) Enter a standby text.
A standby text is a fixed label shown in the top left part of
the screen on the DECT handset when in idle state.
Note: This feature is only available if Spectralink DECT
handsets are being used. If third party DECT handsets
are being subscribed, this feature is not supported.
Disabled (Optional) If enabled, the user is disabled.
Note: A disabled user cannot make calls from the hand-
set.
To Next Page
Loading...
