SpectraLink IP-DECT 200 - Page 246

14215700-IG, Edition 8.0
April 2018, Original document
246
Field Setting
Provisioning Configuration - Users
Import Enable.
If enabled, this will make automatic update possible.
Provisioning Configuration - Firmware
Wirelesss Server (Only relevant to
Spectralink IP-DECT Server 200)
Enter name of firmware image file. Must match file name on
provisioning server.
Leave empty for no firmware download.
Wireless Server (Only relevant to
Spectralink IP-DECT Server
400/6500)
Enter name of firmware image file. Must match file name on
provisioning server.
Leave empty for no firmware download.
Enable the Use firmware as default check box if you want
the server firmware as default for all base stations and media
resources (recommended).
Handset - Butterfly Enter name of firmware image file (-Over-the-Air.bin). Must
match file name on provisioning server.
Leave empty for no firmware download.
Handset - 75x2, 76x2 and 77x2
series
Enter name of firmware image file (-Over-the-Air.bin). Must
match file name on provisioning server.
Leave empty for no firmware download.
Handset - 72x2 series Enter name of firmware image file (-Over-the-Air.bin). Must
match file name on provisioning server.
Leave empty for no firmware download.
Handset - OEM Enter name of firmware image file. Must match file name on
provisioning server.
Leave empty for no firmware download.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide