STONEX R2 PLUS - Select job

Stonex R2 PLUS Total Station - User Manual 99
21.4 Record Note
【Procedure of recording note】
1. Press F3: [REC] on P3 in measure mode to enter into
record mode. The active JOB will display.
2. Select “5. Note”.
3. Input note and press F1: [OK] to save. The max length is
60 characters.
NOTE:
Max note length is 60 characters.
Meas PC 0.0
ppm 0
SD
VA 302.5432gon
HA 0.0000gon P3
EDM OCC OFST R E C
REC JOB1 P1
1.Occ. data
2.Angle data
3.Collect Points
4.Note
5.View
REC/Note Free 13996
ROAD100 A
0OK0