STONEX R2 PLUS - How to Set Parameters

Stonex R2 PLUS Total Station - User Manual 19
3.7 How to Input Number and Alphabet
1. Enter into input code status (See§21.1 Input a code),
the cursor is blinking and ready to input. The note “A” at
the top right corner shows the active input mode, you can
press the key {shift} to switch between alphabet and
number.
2. Input the code in turn and press the blue key {ENT} to
save it. You can press key {BS} to delete your wrong input
before the cursor. The max length of a code is 16
characters.
001:CODEAB
002: 1
003:
004:
005:
↑↓.P T O P LAST DEL
001:CODEAB
002:MY01 1
003:
004:
005:
↑↓.P T O P LAST DEL