Stonex R2 PLUS Total Station - User Manual 92
20.7.2 Rename a Road File
Procedures:
1. Press F2: [MENU] on P2 of the basic measurement mode,
on the page 3 select 1.Road Calculation enter road menu.
2. Select 1.Road file to road file management menu.
3. Select 2.Road File Rename, current road file will display.
4. Input new name, press [ENT] key to confirm. The
program will back to road file management menu
automatically.
NOTE:
The max length of road file name is 8 characters, special symbols cannot be accepted, such as
“#, ? /……”
To Next Page
Loading...
