STONEX R2 PLUS User Manual

Stonex R2 PLUS Total Station - User Manual 94
20.7.4 Delete all Road Files
Procedures:
1. Press F2: [MENU] on P2 of the basic measurement
mode, on the page 3 select 5.Road Calculation enter
road menu.
2. Select 1.Road file to road file management menu.
3. Select 4.Road Initialize. it will ask you to confirm to
clear all roads, press F3:[NO] back to road file
management menu, no file is deleted.
4. Press F4:[YES] to delete all road files, Initing will display,
at last it will back to road file management menu
automatically.
NOTE:
Pay more attention to this operation, after initialization, all the files back to initial status, the
deleted elements and data can not be resumed.
Road File Select P1
ROAD1 0
ROAD2 0
ROAD3 0
ROAD4 0
ROAD5 0
Road Calculation
1.Road file
2.Input the parameter
3.Road Setout
Road file
1.Road File Select
2.Road File Rename
3.Road File Delete
4.Road Initialize
Clear all roads?
NO YES
Initing

STONEX R2 PLUS Specifications

General

Brand	STONEX
Model	R2 PLUS
Category	Measuring Instruments
Language	English