STONEX R2 PLUS User Manual

Stonex R2 PLUS Total Station - User Manual 93
20.7.3 Delete a Road File
Procedures:
1. Press F2: [MENU] on P2 of the basic measurement mode,
on the page 3 select 1.Road Calculation enter road menu.
2. Select 1.Road file to road file management menu.
3. Select 3.Road File Delete, road file list will display.
4. Press ▼ or ▲ arrow key to move cursor, after reach to the
job you want to delete, press [ENT] key, it will ask you to
confirm to delete, press F3:[NO] back to file list, the file will
not be deleted.
5. Press F4:[YES] to delete this file, all the inputted and
calculated data in this file will be cleared, and the file name
change to initial status.
Road Calculation
1.Road file
2.Input the parameter
3.Road Setout
Road file
1.Road File Select
2.Road File Rename
3.Road File Delete
4.Road Initialize
Road File Select P1
ROAD1 96
ROAD2 55
ROAD3 0
Stonex 100
ROAD5 0
ROAD6 0
ROAD7 10
Stonex
Confirm to delete?
NO YES
Road File Select P1
ROAD1 96
ROAD2 55
ROAD3 0
ROAD4 0
ROAD5 0
ROAD6 0
ROAD7 10

STONEX R2 PLUS Specifications

General

Brand	STONEX
Model	R2 PLUS
Category	Measuring Instruments
Language	English