STONEX R2 PLUS - Clear all Codes

Stonex R2 PLUS Total Station - User Manual 113
23.5 Clear all known points’ data
【Procedure of clearing all known points】
1. Press F3: [MEM] in the status mode to enter into
memory management.
2. Select “2.Known data”, job list will display. Select one
Job you want to operate, press [ENT] key to confirm,
known data menu will display, you can see the active JOB
on the second line.
3. Select “5.Clear”.
4. Press F3: [NO] back to known data management.
Press F4: [YES] to delete all known points data of the
active JOB completely.
Memory
1.JOB
2.Known data
3.Code
4.Storage Media Select
5.USB
JOB selection P1
DAFENG 10
JOBFF 3000
WOMENSHI 1256
FATELU 100
KEMEN 560
JOB6 510
JOB7 0
Clear
Confirm to delete?
0NO0 YES
Known data
JOB JOB6
1.Key input
2.Com input
3.Delete
4.View
5.Clear
6.Com setting