STONEX R2 PLUS User Manual

Stonex R2 PLUS Total Station - User Manual 22
NOTE:
Every first options with the symbol “﹡” are the factory setting.
3.9.2 Instrument Basic Setting
1. Press key {Cnfg} to enter into config mode.
2. Select “2.Inst. config” to set instrument basic
parameters. Three items display.
3. Change the settings if necessary. Press keys { }/ { } to
select items and press keys { }/ { } to set the options.
4. Press key {ESC} back to the previous mode.
Table 3-2 Option list of basic setting
NOTE:
The options with the symbol “﹡” are the factory setting.
Item
Options
1. Auto off
30min﹡/No/5min/10min/15min
(The instrument would power off automatically to save
battery if no operation in setting time)
2.LCD contrast
0~13 (9﹡)
3.Reticle adjust
0~9 (7﹡)
Config
1.Meas condition
2.Inst config
3.Inst adjust
4.Com setting
5.Unit
6.Date & Time
7.Key Function
Inst config
1.Auto off
2.LCD contrast
3.Reticle adjust
:15min
:9
:7

STONEX R2 PLUS Specifications

General

Brand	STONEX
Model	R2 PLUS
Category	Measuring Instruments
Language	English