STONEX R2 PLUS User Manual

Stonex R2 PLUS Total Station - User Manual 111
23.3 Delete known point coordinate
【Procedure of known points deletion】
1. Press F3: [MEM] in the status mode to enter into memory
management.
2. Select “2.Known data”, job list will display. Select one Job
you want to operate, press [ENT] key to confirm, known data
menu will display, you can see the active JOB on the second
line.
3. Select “3.Delete” and all known points in current JOB will
display.
4. Select a point you want to delete, the point coordinate
will display.
5. Press F1: [NEXT] to display the next point data;
Press F2: [PREV] to display the previous point data;
Press F4: [DEL] to delete it and continue to delete other
points;
Press key {ESC} back to known data management mode.
0.000
0.000
010.919
Memory
1.JOB
2.Known data
3.Code
4.Storage Media Select
5.USB
JOB selection P1
DAFENG 10
JOBFF 3000
WOMENSHI 1256
FATELU 100
KEMEN 560
JOB6 510
JOB7 0
Known data
JOB JOB6
1.Key input
2.Com input
3.Delete
4.View
5.Clear
6.Com setting
Pt# 1
Pt# 2
Pt# 3
Pt# A
Pt# B
Pt# S1
Pt# S1
↑↓.P T O P LAST SRCH
N
E
Z
Pt# S1
NEXT PREV DEL
0.000
0.000
010.919

STONEX R2 PLUS Specifications

General

Brand	STONEX
Model	R2 PLUS
Category	Measuring Instruments
Language	English